Electrical power UNITS FOR DOUBLE-SCISSORS LIFT

General Description
Outfitted with the zero leak bidirectional checking sole-noid valves, this electrical power unit is developed for that operation of two independent circuits. Which are respectively for the primary and subordinate platforms in the double scissors lift. Two cut-off valves are utilized for decreasing the machine manually in case of electrical power reduction. If a lot more independent circuits are needed for the application please make contact with us for availability.
Remark: 1. Please seek advice from our product sales engineer for your distinct pump displacement, motor power or tank capability.
2. CSA or UL licensed motors are available upon request.
Distinctive Notes
1. The AC motor is of S3 duty cycle, which can only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all of the hydraulic elements concerned prior to set up of the energy unit.
three. Viscosity in the oil shoud be 15~46 cst,as well as oil should really be clean and no cost of impurities,N46 hydraulic oil is recommended.
4. The energy unit should really be mounted vertically.
five. Check the oil level within the tank following the first running in the electrical power unit.
6. Oil changing is needed right after the first one hundred operation hrs,afterwards after each and every 3000 hours.