We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Metallurgy, mineral processing ball mill introduction
Metallurgy, mineral processing ball mill by feeding part, discharging part, a rotary part, transmission part (reducer, small gear, motors, EPT control) and other major parts.Hollow shaft adopts steel castings, the liner is detachable, rotary gear hobbing with casting, the cylinder body is inlaid with a wear resistant lining board for ball mill, with good resistance to wear.This machine has smooth operation, reliable work.
Metallurgy, mineral processing, large ball mill with double row self-aligning roller bearings instead of conventional Pap alloys bearing, good sealing, long service life, convenient disassembly and cleaning.Selection of large bearing from the point of view of technology, its bearing capacity is much higher than the load of the mill, so his life under normal circumstances should be higher than the mill’s life, and because the bearings to reduce the friction resistance and static moment of resistance, coupled with the use of hydraulic coupling, is the motor power than conventional reduced 10.7-40.5%, metallurgical ore dressing mill by discharging part, to drive feeding part, revolving, (reducer, small gear, motors, EPT control) and other components, hollow shaft adopts steel castings, the liner is detachable, , rotating big gear only adopts casting hobbing processing, the shell lining with wear-resistant, good wear resistance, operation stable, reliable work!Widely used in all kinds of ferrous and non-ferrous metals, rare metal mineral, metallurgy, construction, cement, ceramics, glass and other industries.
Ball Mill Machine Working Principle
Our ball mill is of horizontal, cylindrical and tubular structure. The materials are evenly fed through the charging device to warehouse where there are step scales boards, corrugated scale boards and different specifications of steel balls. When the cylinder rotates, the centrifugal force produced causes the steel balls rising and falling to impact and grinds the materials in the ball mill. The materials are then lead to the second cabin for further milling until they turn into powders and are discharged from the outlet.
Ball Mill Structure
Ball Mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, EPT control) and so on. The hollow axis adopts the cast steel and the lining can replace , the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scale board. This machine runs steadily and works reliably.
Ball Mill Shippment
| Specifications | The cylinder speed ( r/min ) | Ball charge ( t ) | Feed particle size ( mm ) | The grain size ( mm ) | Yield ( t/h ) |
Motor | |
| Model | Power | ||||||
| MQG900X1800 | 38 | 1.8 | ≤25 | 0.074-.06 | 0.8-1 | Y255M-8 | 22 |
| MQG900X3000 | 37.4 | 2.7 | ≤25 | 0.074-0.3 | 0.8 | Y225M-6 | 30 |
| MQG1200x2400 | 32 | 4.8 | ≤25 | 0.074-.06 | 1.5-2 | Y280M-8 | 45 |
| MQG1200X4500 | 30 | 5.2 | ≤25 | 0.074-.06 | 1.5 | Y280M-6 | 55 |
| MQG1500x4500 | 28.8 | 10 | ≤25 | 0.074-0.4 | 3-4 | JR126-8 | 110 |
| MQG1500x5700 | 28.8 | 12 | ≤25 | 0.074-0.4 | 3-5 | JR127-8 | 130 |
| MQG1500x6400 | 28.8 | 13 | ≤25 | 0.074-0.4 | 3-5 | JR127-8 | 130 |
| MQG1830x5400 | 24.5 | 15 | ≤25 | 0.074-0.4 | 5-7 | JR137-8 | 210 |
| MQG18306400 | 24.5 | 19 | ≤25 | 0.074-0.4 | 5-7 | JR137-8 | 210 |
| MQG1830x7000 | 24.5 | 20 | ≤25 | 0.074-0.4 | 6-8 | JR138-8 | 245 |
| MQG2200x7000 | 21.6 | 30 | ≤25 | 0.074-0.8 | 8-10 | JR158-8 | 380 |
| MQG2200x9000 | 21.4 | 34 | ≤25 | 0.074-0.8 | 8-10 | JR1510-8 | 475 |
| MQG2400x7000 | 20.4 | 36 | ≤25 | 0.074-0.8 | 10-14 | JR1510-8 | 475 |
| MQG2400x8000 | 20.4 | 42 | ≤25 | 0.074-0.8 | 10-14 | YR630-8 | 560 |
| MQG2600x8000 | 19.6 | 52 | ≤25 | 0.074-0.8 | 16-20 | JR1512-8 | 630 |
| MQG3000x9000 | 18.3 | 78 | ≤25 | 0.074-0.8 | 20-25 | YR1000-8/1180 | 1000 |
COMPANY PROFILE
ZheJiang HangZhou MINING MACHINERY CO., LTD was founded in 1956, after more than half a century of development, has now become a domestic first-class modern machinery manufacturing enterprises.Product marketing at home and abroad.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
