SNOW PLOW Power UNIT

General Description
Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is built to operate material dealing with equipment. The lowering motion is achived from the solenoid valve with the reducing velocity controlled by an adjustable needle valve. The left and suitable functions are equipped that has a dual pilot operated test valve and cross-over relief valves.
Remark: Please seek the advice of our sales engineer for the distinctive pump displacement, motor power or tank capacity.
Specific Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned before set up of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities.N46 hydraulic oil is encouraged.
4. This energy unit need to be mounted horizontal.
five. Check the oil degree in the tank following the very first begin in the power unit.
six. Oil changing is needed just after the original 100 operation hours, afterwards as soon as each 3000 hrs.